Hsintek Optical Instrument Corporation

Products > AK-100 Interferometer

AK-100
Click for Larger Image Click for larger image

AK-100

System
Test Beam 102 mm (4")
Zoom (6x) Rotary dial (continuous)
Focus ± 2.0 m
Intensity Rotary dial
Alignment Simple two spot alignment
Alignment View ± 1.8 degrees
Part Viewing Live video on computer screen
Performance
Repeatability 3-flat 1 λ / 600 PV
RMS Repeatability 2 λ / 2000
Height Resolution λ / 8000
Spatial Resolution 640 × 480
Fringe Resolution 180 fringes
Digitization 8 bits
Acquisition Time 300 ms
Averaging Modes Intensity and Phase
Laser Beam
Source Helium-Neon, 632.8 nm, 2 mw
Polarization Circular
Coherence > 100 meters
Electrical
Power 110/240 Volts, 50/60 Hz, 50 Watts
Mechanical
Dimensions 338 mm × 190 mm × 254 mm
13.5" × 7.5" × 10"
Weight 14 kg (39 lb)
Environmental Requirements
Temperature 15ºC to 30ºC (59ºF to 86ºF)
Rate of Temp. change < 1.0ºC per 15 min
Humidity Relative 5% to 95%, no condensing
Vibration Isolation Required for frequencies from 1 Hz to 120 Hz
Assuming reasonable vibration suppression (isolation table, minimal thermals, etc.)
  1. 1 sigma repeatability of 3-Flat Test with 16 averages per set.
  2. 1 sigma of the rms for 10 data sets, each an average of 16 measurements.

AK100 Measurement Configurations

1.) Horizontal Workstation for Spherical Surface Inspection

Horizontal Workstation for Spherical Surface Inspection

2.) Vertical Workstation for Plane Surface Inspection

Vertical Workstation for Plane Surface Inspection

3.) Laser Interferometer 5-Axis Workstation

Laser Interferometer 5-Axis Workstation
* Results measured with IntelliPhase™
* Patents: 6768553 (U.S.A.), 200935 (Taiwan), 022337970 (China), 3090711 (Japan).
To Top